Skip to Main Content Skip to Footer Content

Window Genie Blog

Pressure Washing

How To Clean Vinyl Siding – 5 Pressure Washing Tips

Vinyl Siding on a House with Water on it

Cleaning Vinyl Siding

To clean your vinyl siding, you will need a soft cloth or a brush with soft bristles and a gentle cleaning solution. You should start from the bottom and go up, washing each part with a hose before it gets dry. You can make your own cleaning solution by mixing water and white vinegar, or water and oxygen bleach. These are natural and safe options that can get rid of light mold and mildew stains without hurting your plants or the earth.

Here Are 5 Tips For Cleaning Vinyl Siding

  1. Use Common Household Cleaners: For tougher stains on vinyl siding, consider using common household cleaners like Fantastik, Murphy’s Oil Soap, Windex, or Lysol.
  2. Tackle a Variety of Stains: These products are effective in removing a range of stains, including dirt, grease, oil, rust, crayon, ink, and bubble gum.
  3. Avoid Harsh Cleaners: Steer clear of using harsh cleaners such as paint thinner, nail polish remover, spot removers, and paint remover on vinyl siding.
  4. Beware of Chlorine Bleach and Furniture Cleaner: Straight chlorine bleach and furniture cleaner can also damage vinyl siding, so it’s best to avoid these.
  5. Prevent Damage and Discoloration: Using inappropriate cleaners can cause the vinyl siding to change color or fade, so always choose your cleaning products wisely to maintain the appearance of your siding.

How To Clean Vinyl Siding Without Scrubbing

Cleaning vinyl siding without scrubbing can be a challenging task, but not impossible. There are several methods you can try to make your siding look as good as new without damaging it or harming the environment. Some ways of cleaning vinyl siding without scrubbing are:

  • Pressure washing
  • Vinegar Mix In a Spray Bottle
  • Baking Soda
  • Bleach

Is Pressure Washing Vinyl Siding Safe?

The short answer to the question is a resounding “YES!”, but it does come with some strings attached. Pressure washing vinyl siding can be a safe way to clean your home and add years to the lifespan of your walls’ exterior surfaces, or it can be a fast track to siding damage – it all depends on who is behind the washer.

The learning curve for pressure washers isn’t friendly, and amateur attempts practiced on your vinyl siding could cause some very ugly scarring. However, finding qualified pressure-washing professionals can be more challenging than it sounds. In this era of unregulated online classified listings, anybody with a department store brand pressure washer can throw an ad up proclaiming that they are experts. Since you are ultimately putting your house in the hands of strangers, you need to make sure that you are dealing with trusted and highly-trained professionals. For this reason, we recommend turning to established franchises like Window Genie; with decades of experience under our belts, and the best tools dangling from them, you can be sure that your home will look its best and have its lifespan increased rather than diminished!

If, however, you decide to take the DIY route, we can help there too. The following tips will help you stay safe and save money when pressure washing the vinyl siding on your own:

How To Safely Wash Vinyl Siding

First the right equipment. You can find pressure washers in many different places. Big-box department stores carry cheap models, while hardware stores typically have higher-quality versions available. Garage sales, rental shops, and family equipment loans are the most common ways that people get their hands on their first pressure washer, and that can be a problem. Outdated or unregulated models could pose a safety hazard both to you and your vinyl siding. Try to find models with modern safety features such as quick-release triggers, warning labels, ground-fault circuit interrupters, temperature control switches, unloader valves, back-flow protection, rupture disks, and thermal overload motor protection. If your model lacks any of these, look elsewhere!

Do your homework. Make sure to read all relevant safety manuals from the manufacturer before you start pressure washing vinyl siding. This will help reduce the time it takes to learn how to use your equipment and familiarize you with all safety processes.

Mind electrical hazards. Ensure that electric pressure washers are properly connected and grounded at all times. Also beware of shock hazards around the house, and make sure that you are wearing rubber-soled shoes for extra protection.

Follow fundamental rules for safe use. Regardless of the model you are using, some safety rules remain constant. Don’t operate pressure washers indoors. Never point the washer at people or animals. Wear eye protection at all times to guard against any dirt or contaminants dislodged by the jet of water. Wear hearing protection. Maintain your pressure washer regularly to avoid any serious equipment failures. Follow all appropriate instructions that come with the cleaning detergent you have chosen.

Use the right techniques. It is difficult to prescribe any single technique because of the huge variance between pressure washer models, but there are some general guidelines that we can share. Always start with a wider fan pattern, and keep the nozzle moving. Always hold it at the distance recommended in your user manual. Avoid blasting directly into corners, beneath the lip of a window, or into dryer and attic vents.

Want more details about cleaning vinyl siding? Visit our pressure washing page to learn more, or to schedule your professional appointment today.

Let Us Call You

By checking this box, I agree to opt in to receive automated SMS and/or MMS messages from {Brand Name}, a Neighborly company, and its franchisees to the provided mobile number(s). Message & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages.

Find A Window Genie Near Me

Let us know how we can help you today.

Call us at (877) 243-8624
Window Genie work van.